Automotive AC Recharge

 

When homeowners start researching air conditioner repairs or new AC systems, “Freon” and “Puron” are two refrigerant terms that frequently come up. Both are commonly associated with residential HVAC systems, but their roles are changing. R-22 (commonly called Freon) has been phased out for new equipment, while R-410A (Carrier’s Puron) is being replaced in new systems by lower-GWP refrigerants such as R-454B and R-32.

This difference is especially important for Tucker homeowners facing decisions about keeping an older AC running or replacing it. For those navigating these choices, ACS Heating & Air Conditioning is a trusted local resource for up-to-date, honest advice.

 

What Is the Difference Between Freon and Puron?

“Freon” and “Puron” are commonly used terms for refrigerants found in residential HVAC systems, but they refer to different refrigerant types. R-22 is commonly called Freon, while R-410A is marketed as Puron by Carrier Newer HVAC systems are now transitioning to lower-GWP refrigerants such as R-454B.

 

HVAC Factor R-22 (Commonly Called Freon) R-410A (Puron)
Common Era Primarily older residential systems Widely used in residential systems through the 2020s
Chemical Type HCFC HFC blend
Ozone Depletion Yes No
Global Warming Potential (GWP) 1,810 2,088
ASHRAE Safety Class A1 A1
U.S. New-Equipment Status No longer used in newly manufactured residential equipment Being replaced by lower-GWP refrigerants in newer equipment
Can Existing Systems Be Serviced? Yes, using available reclaimed/recycled R-22 Yes, existing R-410A systems can still be serviced
Can You Substitute One for the Other? No No
What Happens When Refrigerant Is Low? Usually indicates a leak requiring diagnosis Usually indicates a leak requiring diagnosis
Why the Transition? Ozone protection Lower-GWP alternatives for newer equipment
Newer Replacement Refrigerants — R-454B / R-32; Puron Advance for Carrier systems
Homeowner Takeaway Aging R-22 equipment may make replacement worth considering Existing R-410A equipment does not need replacement solely because newer refrigerants are being introduced

 

The big takeaway: your HVAC system determines which refrigerant it needs. R-22 and R-410A aren’t interchangeable, and newer R-454B systems require equipment specifically designed for that refrigerant.

 

 

Why Freon (R-22) Is Being Phased Out

  • Ozone depletion: R-22 is an HCFC that contributes to ozone depletion.
  • U.S. production ended: New production and import of R-22 ended in the U.S. on January 1, 2020, under the EPA’s HCFC phaseout. Existing systems can still be serviced with available R-22.
  • Existing systems can still be serviced: R-22 equipment isn’t automatically unserviceable; technicians can use existing stock or reclaimed/recycled R-22.
  • Supply is limited: With no new production, availability depends increasingly on recovered and reclaimed refrigerant.
  • Repair costs can rise: Limited supply can make R-22 more expensive than newer refrigerant options.
  • Replacement may make sense: For an aging R-22 system facing a major repair, comparing repair costs with full system replacement can be worthwhile.

The takeaway: R-22 systems can continue operating, but their refrigerant supply situation makes long-term replacement planning increasingly relevant.

 

Puron (R-410A): The Refrigerant That Replaced R-22

Puron, or R-410A, became the dominant refrigerant for residential air conditioners and heat pumps as the industry moved away from R-22. Unlike R-22, R-410A does not deplete the ozone layer, but its relatively high global warming potential has led to the next stage of the refrigerant transition.

  • What it is: R-410A, marketed as Puron by Carrier
  • Why it replaced R-22: Contains no ozone-depleting chlorine
  • Operating pressure: Higher than R-22, requiring equipment specifically designed for R-410A
  • Compatibility: Not interchangeable with R-22; an R-22 system cannot simply be topped off with R-410A
  • Where it’s found: Common in residential HVAC systems installed during the R-22-to-low-GWP transition
  • New-system status: R-410A is no longer permitted for new residential split-system installations beginning January 1, 2026
  • Existing systems: R-410A equipment can still be repaired and serviced throughout its useful life
  • What’s replacing it: Lower-GWP refrigerants such as R-454B and R-32
  • Bottom line: R-410A remains relevant for servicing existing systems, but new HVAC equipment is moving toward lower-GWP refrigerants.

 

Which Refrigerant Does Your System Use?

Follow these steps to identify the refrigerant in your HVAC system:

Look for the nameplate or equipment label on the AC condenser or heat pump. It typically lists the refrigerant type.

Look for labels such as R-22, R-410A, R-454B, or R-32.

Installation records, owner’s manuals, and previous service invoices may also identify the refrigerant.

Older equipment is more likely to use R-22, while many newer systems use R-410A or newer lower-GWP refrigerants.

R-22, R-410A, R-454B, and R-32 are not interchangeable and require equipment specifically designed for each refrigerant.

A qualified HVAC technician from our team can confirm the refrigerant, check for leaks, and determine whether repair or replacement makes the most sense.

Refrigerant doesn’t normally get consumed during operation, so a low charge can indicate a leak that should be diagnosed and repaired.

 

Get Help from ACS Heating & Air Conditioning

For homeowners in Tucker, Decatur, and Lilburn, our team at ACS Heating & Air Conditioning is ready to discuss your current system’s refrigerant and what it means for future repairs or upgrades.

Before deciding whether to repair an older AC or invest in a new installation, confirm your system’s details and available options with ACS Heating & Air Conditioning. Our expert guidance helps ensure comfort, efficiency, and peace of mind for the seasons ahead.

 

Contact Us

"*" indicates required fields